Silicone Edge vs Velcro vs Double-Sided Tape: Which Finish Do You Need?

The finish on a fabric graphic decides how it fixes to your frame or wall. Silicone edge (SEG) pushes into an aluminium frame channel, Velcro hooks onto walls and systems, and double-sided tape sticks to flat surfaces. Here’s how to choose, from a printer that does all three, urgently.

Silicone edge (SEG) Velcro Double-sided tape Backlit or black back All done in-house
Short answer

Which finish do I need for my fabric graphic? Use silicone edge if you have an aluminium SEG frame or lightbox. Use Velcro for shell scheme walls and many pop-up systems. Use double-sided tape for quick fixing to smooth, flat surfaces. Not sure? Send us a photo of the frame or wall.

9pmbook by for overnight (later? still call us)
24/7urgent production
3.2mwide fabric & banner rolls
UK-widedelivery, fitting available
Close-up of silicone edge finished around a fabric graphic
Silicone edge (SEG) finish

Side-by-side comparison

Silicone edge (SEG)VelcroDouble-sided tape
Fixes toAluminium SEG frames and lightboxesShell scheme walls, Velcro-ready systemsSmooth, flat surfaces
LookTight, frameless, premiumNeat, flatNeat, flat
ReusableYes, swaps in and out of framesYesUsually one-off
Best forStands, lightboxes, retail displaysShell schemes, panel wallsShort events, quick fixes

Silicone edge (SEG)

A thin silicone strip runs around the graphic and pushes into a groove in an aluminium frame, pulling the fabric tight. It’s the standard for modern exhibition stands and backlit lightboxes. Graphics can be swapped without changing the frame.

Velcro

Velcro is fixed to the back of the fabric so it can be pressed onto walls, shell scheme panels or Velcro-ready display systems. It’s a good choice when there’s no SEG frame.

Double-sided tape

Tape is applied to the back of the graphic for fixing to flat, smooth surfaces. It’s the quickest to put up and the simplest choice for short events.

Can you get all three urgently?

Yes. We finish all three in-house and keep silicone edge in stock, so the finish never holds a job up. Book by 9pm for overnight production on backlit or black back fabric.

Questions we get asked

What does SEG stand for?

Silicone Edge Graphic: a fabric print with a silicone strip around the edge, which fits into the channel of an aluminium frame.

Can I use Velcro instead of silicone edge in an SEG frame?

No. An SEG frame needs silicone edge to hold the fabric tight in its channel. Velcro is for walls and Velcro-ready systems.

Which finish is best for a lightbox?

Silicone edge on backlit fabric.

Which finish is quickest to put up?

Double-sided tape, on a smooth flat surface. For frames, silicone edge is also quick once you know how.

Can you do all three finishes urgently?

Yes. All three are done in-house, and we keep silicone edge in stock, so we can turn them around overnight.

Related urgent print services

Not sure which finish? Send us a photo

Send a photo of your frame or wall and we’ll tell you which finish you need, then print it overnight if you’re short on time.